Share

Several Golden Advantages of Pulling Bundled Cable in New and Remodeled Homes

I don’t know which manufacturer first invented bundled cable for residential and small commercial use, but it was a fine day for America and the rest of the industrialized world when they did. It is like the old proverbial phrase, “It’s better than sliced bread.”

Many of you are thinking privately to yourself now, “Wow this guy really likes his bundled cable!” But it’s true, this new way of wrapping multiple cable types in one tough outer coating made wiring houses and small businesses so much easier. It opened up many other possibilities in the sheer number of electronic technologies that could be installed due in large part to labor savings. However, it also reduced the overall cost of the cable as well.

Think About the Labor

Think about what it takes to pull a single cable through the walls from the most distant bedroom in a home all the way back to the electronics distribution panel. First you have to select a path in the framing studs of the home, then drill holes large enough to accommodate the particular wire you are pulling. When that is complete you set the cable up on a roller or pull it out of a box through the walls to the panel.

Yes, if you are going to pull three types of cable at once the trick is to just drill slightly larger holes in the framing then wrestle with each wire as you pull it through the walls. All the while special attention has to be given to the process to avoid kinking or tangling the cables. When you are all complete you have three different cables pulled for that bedroom.

Do It the Easy Way

Now picture yourself drilling a 5/8” hole in the center of the framing studs. Set up a 500 foot roll of bundled cable to be pulled off the roll. First of all when you pull the cable it is much thicker and comes off the roll without kinking or tangling. Those two problems are a thing of the past. You can be pretty rough while pulling it through the walls because the outer coating is thicker than smaller cable. Damaging the cable by bending it too much is not going to happen with bundled cable.

Now Look What You’ve Got

When you are finished you have successfully pulled two Cat 5e twisted pair cables, two quality RG-6 quad-shielded coax cables, and two multi-mode fiber optic cables. Into one room with one pull you have pulled enough cable for three telephone lines, one fax line, one computer terminal, video entertainment, a video camera, plus enough fiber optic cable to handle any technology that will come along in the next 25 years. Now you know why I am so excited about bundled cable.

Well if you have pulled one bundled cable to every room in your house, now you can install an electronics distribution cable in a centrally located room and choose the systems you want. What follows is a laundry list of systems people commonly incorporate in their homes.

  • Telephone system
  • Front door and whole-house Intercom
  • CCTV system for lifestyle and security cameras
  • Cable TV to each room
  • High-speed Internet access in each room
  • Access control
  • Whole-house stereo

Install Your Own System

Of course, what I have outlined here is the simple explanation of installing a structured wiring system. However, it is not rocket science, meaning you could install your own system saving yourself lots of money. This simple little explanation I have provided today is not going to be enough guidance on installing your own system.

Instructional Guide

What you really need is a complete instruction manual that provides specific information on which system to install along with specific connector type and model information and specific guidance on standard and optional electronic hubs. With that degree of guidance you truly could purchase the necessary components, then install the system yourself and in the process save yourself a pile of money.

Share